|Fan Speed:||800 rpm|
|Bearing Type:||Sleeve Bearing|
|Max. Airflow:||93.8 m³/h|
|Max. Air Pressure:||0.92 mm-H²0|
|Noise Level:||12.4 dB(A)|
|Weight incl. Fixed Cable:||162 g|
|Dimensions (L x W x H):||140 x 140 x 25 mm|
|Cable and Connectors:|
|Cable Length:||30 cm|
|Rated Voltage:||12 V|
|Rated Current:||0.1 A|
|Rated Power:||1.2 W|
|Start Voltage:||7 V|
|Silent Eagle 800|
|3-Pin to 4-Pin Power Supply Adapter|
|Set with Rubber Bolts|
|Set with Fan Screws|
The fan does not rotate.If the fan is directly connected to the mainboard please check if the fan control on the mainboard is enabled, and that possibly the starting voltage for the fan is not reached.
Can I connected the fan to a mainboard with a 4-pin Molex connector?Yes, the 3-pin connector is compatible with the 4-pin connector of the mainboard. The fan then does not support digital PWM control.
The fan does not reach the specified rotational speed.If the fan is connected to the mainboard, please check that the fan control in the Bios of the mainboard is activated. Let the fan run at lease one hour before measuring the rotational speed. The fan needs a certain amount of run time before the target rotational speed is reached.
> This link will take you to our support form.