SHARK Blades

SHARK Blades
Caution! If you think you know everything about cooling fans, get ready to be surprised! This fan is different, very different. It’s a triple attack approach to a silent and cooler system.
First: Wind Noise? Not Here!
The special 3D curved design with striped air guides steers the airflow straight through the fan blades, thus preventing air turbulence - the main cause of wind noise. Even after many hours of use, the fan remains silent due to the end of the guides having special ‘shark’ teeth to reduce both drag and dust build-up. This shark can bite, so choose one of the several different brightly colored air guides to confirm that it’s running (since you won’t hear it…) in order to protect your fingers while working inside your computer.

Second: Vibration Noise Eliminated.
The SHARK Blades are equipped with a fluid bearing for long life and ultra-smooth operation. Fluid bearings are used in many high-performance hard disk designs and are popular for their smooth operation and long lifespan. The fan blades are precision balanced to avoid vibrations.

Third: Controlled Power.
With its 120 mm diameter, optimized airflow and powerful, yet silent motor, there is plenty of cool air available for your system. The SHARK Blades are powered directly from the power supply, using the included adapter plug or a 3-pin socket for a temperature controlled run.

Fan Speed: 1,000 rpm
Bearing Type: Fluid Dynamic Bearing
Max. Airflow: 56 m³/h
Max. Air Pressure: 2.63 mm-H²0
Noise Level: 19 dB(A)
MTBF: Min. 50,000 Hours
Color Versions: Blue, green, red or yellow
Weight incl. Fixed Cable: 120 g
Dimensions (L x W x H): 120 x 120 x 25 mm
Cable and Connectors:
Connector: 3-Pin Connector
Cable Length: 50 cm
Sleeved Cable:
Electrical Specifications:
Rated Voltage: 12 V
Rated Current: 0.15 A
Rated Power: 1.2 W
Start Voltage: 7 V

Package Contents:
SHARK Blades
3-Pin to 4-Pin Power Supply Adapter
Set with Rubber Bolts
Set with Fan Screws
EAN Code:
Blue: 4044951013883
Green: 4044951013876
Red: 4044951013869
Yellow: 4044951013852


  • The fan does not rotate.
    If the fan is directly connected to the mainboard please check if the fan control on the mainboard is enabled, and that possibly the starting voltage for the fan is not reached.
  • Can I connected the fan to a mainboard with a 4-pin Molex connector?
    Yes, the 3-pin connector is compatible with the 4-pin connector of the mainboard. The fan then does not support digital PWM control.
  • The fan does not reach the specified rotational speed.
    If the fan is connected to the mainboard, please check that the fan control in the Bios of the mainboard is activated. Let the fan run at lease one hour before measuring the rotational speed. The fan needs a certain amount of run time before the target rotational speed is reached.
Do you have questions about our products or need help? Our experts will be happy to assist you.

> This link will take you to our support form.
Support Form
Note: Relevant product information such as user manuals, data sheets and drivers can be found under the category "Downloads".
The serial number is located directly on the product and is usually a 17-digit number. Please do not confuse it with the EAN code.

Hardware which was directly used with this product that could possibly have something to do with the failure.

Software which was used by or with this product that could possibly have something to do with the failure.

Please enter the fault description as detailed as necessary and also as brief as possible.

Upload here any photos or screenshots which could be beneficial in understanding and detailing the fault. (Allowed file formats: .jpg, .jpeg, .png, .bmp, .pdf, .doc, .docx)
Send a copy to my e-mail address
* I have read the SHARKOON GmbH Internet Terms and Conditions understand and give consent that my personal data will be saved in accordance with the privacy policy.

Please trace the figure below

* required fields