Twin-Run technology allows the fan to operate on either a PWM or Linear electrical signal-a worldwide first in fan technology. Simply connect one of the four included adapter cables (Standard, Low Noise, Silent or Ultra Silent) and control the speed of the fan via different voltages or the PWM function of the mainboard.
The Silent Eagle SE is available in 80 and 120 mm versions and is an all-purpose fan, suitable for use with a CPU cooler, as a case fan, or for hard drive cooling.
|Fan Speed:||1,200 rpm|
|Bearing Type:||Sleeve Bearing|
|Max. Airflow:||96.84 m³/h|
|Max. Air Pressure:||1.44 mm-H²0|
|Noise Level:||6.5 dB(A) - 20.5 dB(A)|
|Dimensions (L x W x H):||120 x 120 x 25 mm|
|Cable and Connectors:|
|Cable Length:||30 cm|
|Rated Voltage:||12 V|
|Rated Current:||0.1 A|
|Rated Power:||1.2 W|
|Start Voltage:||6.5 V|
|Silent Eagle SE 120 mm|
|Set with Rubber Bolts|
|Set with Fan Screws|
|Standard Cable: 4-Pin to 4-Pin PWM (Color: White)|
|Low-Noise Cable: 4-Pin to 4-Pin 12 V (Color: Black)|
|Silent Cable: 4-Pin to 4-Pin 9 V (Color: Red)|
|Ultra Silent Cable: 4-Pin to 4-Pin 7 V (Color: Blue)|
The fan does not rotate.If the fan is directly connected to the mainboard please check if the fan control on the mainboard is enabled, and that possibly the starting voltage for the fan is not reached.
Can I connected the fan to a mainboard with a 4-pin Molex connector?Yes, the 3-pin connector is compatible with the 4-pin connector of the mainboard. The fan then does not support digital PWM control.
The fan does not reach the specified rotational speed.If the fan is connected to the mainboard, please check that the fan control in the Bios of the mainboard is activated. Let the fan run at lease one hour before measuring the rotational speed. The fan needs a certain amount of run time before the target rotational speed is reached.
> This link will take you to our support form.