SATA QuickPort Intern Multi

The SATA QuickPort Multi is an internal docking station which has separate bays for 2.5" hard drives/SSDs and 3.5" SATA hard drives. A fast-swap mechanism facilitates the handling of the hard drives, which are connected by two enclosed SATA cables to the mainboard.
Power is supplied by the direct connection of the docking station to a SATA power connector from the power supply.

The dock, which is inserted into a 5.25" drive bay of a PC case, also offers two USB 3.0 front ports which are connected to a corresponding mainboard connector (19-pin). The docking station is decoupled by special rubber buffers mounted in the case so that the vibrations of the disks are not transferred to the case's body. The SATA QuickPort Intern Multi includes a switch turning on/off both hard drives.

General:
Required Drive Bays: 1x 5.25"
Drive Bays: 2
Internal Interface: SATA
Max. Data Transfer Rate SATA: 6 Gbit/s
Max. Height 2.5" HDD: 9.5 mm
USB 3.0 (Front): 2
On/Off Switch:
Power Supply: 15 Pin SATA
Weight: 475 g
Dimensions (L x W x H): 194 x 148 x 42 mm
Compatibility:
2.5" SATA HHD/SSD:
3.5" SATA HDD:
SATA Compatibility: Revision 1.0, 2.0, 3.0
Max. HDD Capacity: 2x 8 TB
Supported Operating Systems: Windows 7/8/10

Package Contents:
SATA QuickPort Intern Multi
SATA Cable
Internal Power Cable
Manual
EAN Code:
4044951012640

Datasheets
Manuals
FAQs

  • My hard drive does not appear in My Computer.
    If the hard drive is new, it should be partitioned and formatted in Windows Disk Management, then it should appear in My Computer.
  • My hard drive is sporadically ejected from Windows or the data transfer stops.
    Ensure that your USB or eSATA uses the latest firmware and driver.
Do you have questions about our products or need help? Our experts will be happy to assist you.

> This link will take you to our support form.
Support Form
Note: Relevant product information such as user manuals, data sheets and drivers can be found under the category "Downloads".
The serial number is located directly on the product and is usually a 17-digit number. Please do not confuse it with the EAN code.

Hardware which was directly used with this product that could possibly have something to do with the failure.

Software which was used by or with this product that could possibly have something to do with the failure.

Please enter the fault description as detailed as necessary and also as brief as possible.

Upload here any photos or screenshots which could be beneficial in understanding and detailing the fault. (Allowed file formats: .jpg, .jpeg, .png, .bmp, .pdf, .doc, .docx)
Send a copy to my e-mail address
* I have read the SHARKOON GmbH Internet Terms and Conditions understand and give consent that my personal data will be saved in accordance with the privacy policy.

Please trace the figure below



* required fields