The Sharkoon QuickPort XT HC allows the comfortable connection of a SATA HDD to a PC or laptop via USB 3.0. Also, an integrated USB 3.0 hub and included card reader for SD/MMC cards come built-in. The docking station is suitable for a 2.5" HDD/SSD or a 3.5" HDD. The HDD/SSD can be easily inserted into the drive bay of the QuickPort. The internal SATA port on the docking station supports SATA Revision 3.0 and is backwards compatible with older revisions, as well.
Connection to the PC occurs via the included USB 3.0 cable. The external interface provides, thanks to the USB 3.0 support, a transfer rate up to 5 Gbit/s. The same transfer rate applies to peripherals connected to the USB 3.0 hub. The integrated card reader connects via USB 2.0. The included power adapter acts as the power supply.
|External Interface:||USB 3.0 (Type B Port)|
|Internal Interface SATA:||2.5", 3.5"|
|Chip:||JMicron JMS567, Genesys Logic GL3520, Genesys Logic GL828|
|Max. Data Transfer Rate USB:||5 Gbit/s|
|Sleep Mode:||After 30 Minutes|
|USB Front Hub:||✓|
|Cable:||USB 3.0 (Type A Plug to Type B Plug)|
|USB Cable Length:||100 cm|
|Power Supply:||Power Adapter|
|Dimensions (L x W x H):||113 x 103 x 55 mm|
|SATA Compatibility:||Revision 1.0, 2.0, 3.0|
|Native SATA Revison 3.0 Support:||✓|
|Plug and Play:||✓|
|Supported Operating Systems:||Windows 7/8/10|
|SATA QuickPort XT HC|
My hard drive does not appear in My Computer.If the hard drive is new, it should be partitioned and formatted in Windows Disk Management, then it should appear in My Computer.
My hard drive is sporadically ejected from Windows or the data transfer stops.Ensure that your USB or eSATA uses the latest firmware and driver. If the problem is not resolved, please downlowd the latest firmware for the docking station from the Sharkoon homepage.
> This link will take you to our support form.