The case of the RAID station consists of solid SECC steel. The front door is made of ABS plastic, and located behind this, is the hard drive mounting frame, where hard drives in 2.5” or 3.5” format can be screwed into place. The mounting frame itself is simply inserted into the housing and locked.
Regardless of whether it’s a private media collection or the data storage for a small office environment, with the 5-Bay RAID Station you're always on the safe side!
|External Interface:||USB 3.0, eSATA|
|Internal Interface SATA:||2.5", 3.5"|
|Supported RAID Modes:||Clean/Single, JBOD/Large, Clone, RAID 0,1,3,5,10|
|Chip:||JMicron JMB394, JMB 539B|
|Max. Data Transfer Rate USB:||5 Gbit/s|
|Max. Data Transfer Rate eSATA:||3 Gbit/S|
|Sleep Mode:||After 30 Minutes|
|Cooling:||1x 120 mm fan|
|USB Cable Length:||120 cm|
|eSATA Cable Length:||120 cm|
|Dimensions (L x W x H):||282 x 150 x 215 mm|
|Max. Height 2.5" HDD:||15 mm|
|SATA Compatibility:||Revision 1.0, 2.0, 3.0|
|Max. HDD Capacity:||5x 8 TB|
|Supported Operating Systems:||Windows 7/8/10|
|5-Bay RAID Station|
|5x Hard Drive Mounting Frame|
|Set of Mounting Screws|
|If more than one hard drive is addressed in Single Mode via eSATA, port multiplier must be supported by controller.|
> This link will take you to our support form.